Voyetra Turtle Beach Montego II Spécifications télécharger pdf (Page 71)

4-23

Installing the Fan Kit

When you install the fan assembly, make sure the foam strip located

on the fan assembly captures the PC board in the last slot. The foam

strip should not push the board outward, but should secure it in

place.

6. Using a Phillips screwdriver, tighten the captive screws on the fan

assembly one more ¼-turn.

7. Plug the 12-V power connector from the fan assembly into one of

the 12-V power connectors used for drives at the top front of the

chassis (see Figure 4-17).

Figure 4-17 Power Connector

8. Replace the left side panel of the system and return the system to

the upright position.

9. Reconnect system power and turn on all peripherals.

10. Turn the system on.

11. Listen for the fan noise to make sure the fan is working.

Power

connector

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 115 116

Pas de commentaire

Voyetra Turtle Beach Montego II Spécifications Page 71