Voyetra Turtle Beach Montego II Spécifications télécharger pdf (Page 58)

4-10

Installing Memory, the Avid Board Set, and the Fan Kit

Moving the Adaptec 29160LP SCSI Controller Board

The Adaptec 29160LP SCSI controller board is a single-channel Ultra3

controller that ships with the system in PCI slot 5. You must remove

the board from PCI slot 5 and place it in PCI slot 1.

The Adaptec 29160LP SCSI controller board supports Low-Voltage

Differential (LVD) peripherals in two locations:

• The system drive in drive bay 7.

• LVD drives that connect externally to the very-high-density

connector located on the boards metal PCI bracket.

Avid only supports LVD drives off the external connector of the Adaptec

29160LP SCSI controller board.

Installing the Optional PCI Disk Controllers

This section describes installation and configuration requirements for

the optional PCI disk controllers supported on the IBM 6868 system.

The following devices are detailed:

• ATTO Technology ExpressPCI UL3D/160 Dual-Channel LVD

• Emulex LP850 Fibre Channel

Using Table 4-1 on page 4-5, install the disk controllers in the proper

slots using the descriptions provided in the following sections.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 115 116

Pas de commentaire

Voyetra Turtle Beach Montego II Spécifications Page 58